MASTER JAYA CORPORATION SDN BHD added new photo in Vibration
May 9, 2022 at 03:31 pm —
NETTER -NTS Pneumatic Linear Vibrators

NETTER -NTS Pneumatic Linear Vibrators

NTS Pneumatic Linear Vibrators The pneumatic linear vibrators of the series NTS are especially suitable for conveying, emptying and compacting bulk material, due to the completely linear vibration. They are used to empty bins and as drives for conveyor and dosing troughs. A special feature of NTS vibrators is the possibility of the synchronous operation of several NTS when using a coupling kit. The vibration (sinusoidal oscillation) is produced by a freely vibrating, self-reversing piston. This oscillation supports, expedites or enables a variety of applications. NTS linear vibrators start and stop without delay in any installed position. The amplitude is adjusted by means of the optional throttle valve. An increase of the supply pressure causes a higher frequency and centrifugal force. ATEX-compliant linear vibrators of the NTS series and units with a stainless steel and plastic housing are available. Linear vibration Resistant against aggressive environmental conditions Nominal frequenies from 827 min-1 to 9,040 min-1 Centrifugal forces 32 N to 21,808 N Frequency and amplitude are adjustable separately Synchronous operation possible (NTS 350 and higher) Available in ATEX-compliant or in stainless steel read more
MASTER JAYA CORPORATION SDN BHD added new photo
May 9, 2022 at 02:50 pm —
NETTER -NCR Pneumatic Roller Vibrators

NETTER -NCR Pneumatic Roller Vibrators

NCR Pneumatic Roller Vibrators Pneumatic roller vibrators of the series NCR are particularly suitable for the elimination or reduction of friction. They can be used for emptying bunkers and preventing adhesion to pipes and plates. Special features of the NCR vibrators are very high frequencies, high centrifugal forces and insusceptible resonance behavior. The rotary vibration is created by the high centrifugal force of a circulating steel roller, which runs on a steel ring at very high frequency. The frequency, and hence the centrifugal force, can be continuously regulated via the operating pressure. Rotary vibration Suitable for aggressive environmental conditions High propulsive power Nominal frequency from 10,140 min-1 to 34,304 min-1 Centrifugal force from 878 N to 9,100 N Frequency continuously adjustable via air pressure Extreme temparature version availabe, up to 500 °C read more
MASTER JAYA CORPORATION SDN BHD added new photo in Vibration
Apr 29, 2022 at 02:45 pm —
NETTER -PKL Pneumatic Impactors

NETTER -PKL Pneumatic Impactors

PKL Pneumatic Impactors Pneumatic impactors of the series PKL are particularly suitable for eliminating stubborn residues from walls, pipes and containers. Common applications include: elimination of tube-forming, bridging and evacuation of residues. The impact is created by the piston, which is accelerated with the help of a pneumatically preloaded spring. The rapid venting of the piston chamber causes the piston to strike the impact surface abruptly. With the PKL 190 to 740, the impact is made directly on the mounting surface, while the types PKL 1000 to PKL 10000 transmit the impact energy via an impact plate integrated in the knocker.    The PKL series pneumatic impactors can be operated with oil-free compressed air. Higher impact power than traditional impactors Lower compressed air requirement per impact Low-noise versions with elastomer insert EE Versions with automatic control ST ATEX or Stainless Steel versions available   read more
next page